Back

356A

1955 • 1500 Carrera Gt (547/1) • Speedster A T1 • Manual Gearbox, 4 Speed

Left-hand drive

Polished Bumper Guard, Without Exhaust Hole, Right Front Or Left Rear. 356A. 260mm tall, slightly thinner than earlier versions. for Porsche 356A • 1955 • 1500 Carrera Gt (547/1) • Speedster A T1 • Manual Gearbox, 4 Speed

64450503202POL - Polished Bumper Guard, Without Exhaust Hole, Right Front Or Left Rear. 356A. 260mm tall, slightly thinner than earlier versions. for Porsche 356A • 1955 • 1500 Carrera Gt (547/1) • Speedster A T1 • Manual Gearbox, 4 Speed

Stoddard price list

$280.00

Reference : 644 505 032 02 POL

Manufacturer :

Series selected : 356A

Model selected : 1955 - 1500 Carrera Gt (547/1)

Recommended : 1

Weight : 0.794 lbs

Colour : POLISHED

Dimension : 6.102 in

Position : FRONT RIGHT

Other : EUROPEAN VERSION

This guard is for cars without protection tubes (non-US spec), 356A T-2 models (1957 thru 1959). Width is 45 mm. It's a high quality reproduction with a highly polished finish on a nice aluminum casting. Mounting studs are provided with guard.

Note, this guard can be used on the rear left if a sport muffler is fitted. Otherwise, guard version 644 505 033 00 should be used with exhaust-thru provision.

All Part Variants Available

Quantity :

Availability : Not currently available

Notify me when available

Add to a shopping list

All Part Variants Available (Detailed list)

15 peripheral parts in the diagram « BUMPER / BUMPER MOULDING / BUMPER GUARD / BUMPER SEAL »

15 parts

1
Plastic Profile For Bumper Guard, 356, 356A. Sold By The Meter
644 505 391 00 Ship Today (before 5:00pm)

$18.90

Recommended quantity: 4

Shown 2× on this diagram

Part details →
2
Rear Bumper Deco With Insert And Base Gasket. For 356 And 356A.
644 505 043 00 Ship Today (before 5:00pm)

$235.00

REAR

Part details →
3
Bumper Guard, Polished With Exhaust Hole, Left Rear, For 356A
5 versions Ship Today (before 5:00pm)

From $280.00
Choose ›

5 Versions available for this part

Choose a version Part details →
4
Backing rubber front
2 versions Ship Today (before 5:00pm)

From $45.00
Choose ›

2 Versions available for this part

Shown 2× on this diagram

Choose a version Part details →
5
Rear Bumper For 356 356A
2 versions Ship Today (before 5:00pm)

From $569.84
Choose ›

2 Versions available for this part

Choose a version Part details →
6
Rear Bumper Bracket Set, Right And Left, 356, 356A.
NLA 505 231 00 Ship Today (before 5:00pm)

$225.00

REAR

Shown 4× on this diagram

Part details →
7
Rear Bumper Deco Rubber Insert 356, 356A
644 505 413 00 Ship Today (before 5:00pm)

$45.00

Part details →
8
Support in front bumper 356 52-59
644 505 017 00 Ship Today (before 5:00pm)

$80.00

FRONT

Recommended quantity: 4

Part details →
9
Front Bumper For 356 356A
3 versions Ship Today (before 5:00pm)

From $575.00
Choose ›

3 Versions available for this part

Choose a version Part details →
10
Front Bumper Deco 34mm Wide, Complete With Insert And Base Gasket. 356, 356A.
644 505 041 00 Ship Today (before 5:00pm)

$235.00

FRONT

Part details →
11
Front Bumper Guard, Left, 356 Pre-A And 356A T1. 260mm tall. This early version is a little wider at top and bottom.
8 versions Ship Today (before 5:00pm)

From $274.50
Choose ›

8 Versions available for this part

Choose a version Part details →
12
Front Bumper Deco Rubber Insert, 356 356A
644 505 411 00 Ship Today (before 5:00pm)

$45.00

FRONT

Part details →
13
Support in rear bumper 356 52-59
644 505 027 00 Ship Today (before 5:00pm)

$80.00

REAR

Recommended quantity: 4

Part details →
14
Front Bumper Bracket Set. Right And Left. 356, 356A.
NLA 505 131 00 Ship Today (before 5:00pm)

$225.00

FRONT

Part details →
15
Bumper Mounting Plate 356 356A
644 505 135 00 Ship Today (before 5:00pm)

$11.00

Recommended quantity: 4

Part details →

The other parts in the family « Bodywork »

See all products

Other diagrams in the family « Bodywork »

BODYWORK LOGO / BODYWORK LABEL / ENGINE LABEL

FLOOR / TUNNEL / INTERNAL SHEET STEEL WORK

BATTERY BOX / INTERIOR STRINGER / INTERIOR PLATE

INTERIOR PLATE / FRONT BOOT / WHEEL ARCH / STRIKER HOLDER / FRONT WING CLOSING PLATE

BODYWORK / WING / ROCKER PANEL / FRONT AND REAR PANELS / FUEL TRAP

STRIKER HOLDER / REAR WING / PANEL ON OPENING IN REAR WHEEL ARCH / REAR PLATE

BUMPER / BUMPER MOULDING / BUMPER GUARD / BUMPER SEAL

USA BUMPER PROTECTION

FRONT AND REAR COVER / COVER HINGE / COVER LOCK / COVER SEAL / COVER PULL ROD

SEAL ON DOOR / HINGE / WINDOW WINDER / HANDLE / STRIKER / DOOR TRIM

EXTERIOR DOOR HANDLE / DOOR HANDLE SEAL / LOCK KEY / DOOR CYLINDER

DOOR / DOOR SEAL / MOVEABLE DOOR WINDOW

WINDSCREEN / WINDSCREEN SEAL

RUBBER MAT FOR PASSENGER COMPARTMENT AND FRONT BOOT / CARPET / DOOR SILL / WOOD FLOOR

PASSENGER COMPARTMENT SOUNDPROOFING / ENGINE SOUNDPROOFING / FRONT BOOT SOUNDPROOFING

SEAT / SEAT RAIL

DASHBOARD / DASHBOARD LOGO / DASHBOARD HANDLE

FRONT BOOT HANDLE / BODYWORK STRIP / BUMPER GRILLE / REAR COVER GRILLE

SPEEDSTER HOOD / SPEEDSTER HOOD GASKET

HEADLIGHT / FRONT REAR INDICATOR / FUSE BOX / NUMBER PLATE LIGHT / BATTERY COVER

SPEEDOMETER CABLE / REV COUNTER CABLE / PANEL INSTRUMENTS / CLOCK

Stoddard Proudly Distributes These Great Products

Stoddard is not related to Porsche AG. The names "Porsche", "Carrera" and any other trademarks
of Dr. Ing. h.c. F. Porsche AG are used for identification purposes only.
Prices Subject To Change.

Polished Bumper Guard, Without Exhaust Hole, Right Front Or Left Rear. 356A. 260mm tall, slightly thinner than earlier versions. for Porsche 356A • 1955 • 1500 Carrera Gt (547/1) • Speedster A T1 • Manual Gearbox, 4 Speed

All Part Variants Available (Detailed list)

Front Bumper Guard, Left, 356 Pre-A And 356A T1. 260mm tall. This early version is a little wider at top and bottom. 260 MM / FRONT LEFT

Chrome Plated Bumper Guard Without Exhaust Hole, Left Front Or Right Rear, 356A EUROPEAN VERSION / CHROME / CHROME / 155 MM / FRONT LEFT

Front Bumper Guard, Left. Fits 356A with overrider tubes. 155mm stud spacing. USA VERSION / 155 MM / FRONT LEFT

Front Bumper Guard, Right, 356 Pre-A And 356A T1. 260mm tall. This early version is a little wider at top and bottom. 260 MM / FRONT RIGHT

Chrome Plated Bumper Guard Without Exhaust Hole, Right Front Or Left Rear, 356A EUROPEAN VERSION / CHROME / CHROME / 155 MM / FRONT RIGHT

Polished Bumper Guard, Without Exhaust Hole, Right Front Or Left Rear. 356A. 260mm tall, slightly thinner than earlier versions. EUROPEAN VERSION / POLISHED / POLISHED / 155 MM / FRONT RIGHT

Front Bumper Guard, Right. Fits 356A with overrider tubes. 155mm stud spacing. USA VERSION / 155 MM / FRONT RIGHT

Polished Bumper Guard, Left Front or Right Rear, 356A 260mm tall, slightly thinner than earlier versions. POLIE / EUROPEAN VERSION / POLISHED / POLISHED / 155 MM / FRONT LEFT

15 peripheral parts in the diagram « BUMPER / BUMPER MOULDING / BUMPER GUARD / BUMPER SEAL »

The other parts in the family « Bodywork »

Front Fender Brace, Left, For 356, 356A FRONT LEFT

Front Fender Brace, Left, For 356, 356A FRONT LEFT

Front Fender Brace, Right, For 356, 356A FRONT RIGHT

Front Fender Brace, Right, For 356, 356A FRONT RIGHT

HEADLAMP CASING

Headlight Bucket With No Tabs Inside, For Left Or Right. 356 A, B, And C

Headlight Bucket. , 911/912 1965-1989 Also All 356 With Modifications

GROMMET

Rubber Drain Tube, For Headlight Bucket, Floor Pan, Etc. 356, 912, 911

Front Fender Repair Panel Left All 356 LEFT

Front Fender Repair Panel Left All 356 LEFT

Front Fender Repair Panel Right. All 356 RIGHT

Front Fender Repair Panel Right. All 356 RIGHT

Lower Half Front Closing Panel, Left For All 356 FRONT LEFT

Lower Half Front Closing Panel, Right For All 356 FRONT RIGHT

Floor Pan, Complete, 356A T1

LOWER METAL PLATE IN FRONT OF THE REAR SEATS LEFT

LOWER METAL PLATE IN FRONT OF THE REAR SEATS RIGHT

Floor Pan Perimeter Kit For All 356

Diagonal Member For 356A, 356B And 356C

6-Piece Seat Mount Kit For 356A, And 356B T5

SEAT HOLDER ON FRONT FLOOR 356 A + 5-SPEED BOX - PAIR (TWO BLOCKS) PAIR / FRONT

SEAT HOLDER ON REAR FLOOR 356 A+5-SPEED BOX (TWO BLOCKS) PAIR / REAR

Seat Support 356A T1 Manufactured By Simonsen

Frame Repair Panel, Outer Left For 356A, 356B, And 356C EXTERIOR REAR LEFT

Frame Repair Panel, Outer Right For 356A, 356B, And 356C EXTERIOR REAR RIGHT

INNER LONGITUDINAL MEMBER RIGHT REAR – 356A 1955–1959 COUPE / CABRIOLET / SPEEDSTER REAR RIGHT

INNER RAIL REAR LEFT

REPAIR PLATE FOR STRINGER, INSIDE PART LEFT OR RIGHT

Left Front Or Right Rear Longitudinal Reinforcement Plate For 356 Pre-A, 356A, And 356B T5 FRONT LEFT OR REAR RIGHT

Left Front Or Right Rear Longitudinal Reinforcement Plate For 356 Pre-A, 356A, And 356B T5 FRONT LEFT OR REAR RIGHT

Left Rear Or Right Front Longitudinal Reinforcement Plate For 356 Pre-A, 356A, And 356B T5 FRONT RIGHT OR REAR LEFT

Left Rear Or Right Front Longitudinal Reinforcement Plate For 356 Pre-A, 356A, And 356B T5 FRONT RIGHT OR REAR LEFT

REINFORCEMENT IN SAIL FRONT RIGHT OR REAR LEFT

Short Threshold Sill Joint Panel, Left 356 356A 356B 356C LEFT

Short Threshold Sill Joint Panel, Right 356 356A 356B 356C RIGHT

END PLATE FOR REAR STRINGER WITH RAIL FOR ENGINE COVER REAR LEFT

END PLATE FOR REAR STRINGER WITH RAIL FOR ENGINE COVER REAR RIGHT

Tow Hook For 356A 356B And 356C. Kit part w/o rivets.

Tow Hook/ Rivets ,356A, 356B ,356C

Steel Rivets 6x15mm, Package Of Five, 356 Tow Hook

Tow Hook Plate For 356A And 356B T5

Front Luggage Case, Black Leather, For 356 356A and 356B T5

LEATHER CASE PORSCHE 356 A/B COGNAC

INTERIOR WHEEL ARCH FRONT LEFT

INTERNAL WHEEL ARCH FRONT RIGHT

FRAME CROSS BRACKET RIGHT

FRAME CROSS BRACKET LEFT

TORSION BAR HOLDER FOR FRONT SUSPENSION FRONT LEFT

TORSION BAR HOLDER FOR FRONT SUSPENSION FRONT RIGHT

FRONT GRILLE REPAIR PLATE 356 A

Complete Nose Panel For 356A 64450301101

FOG LAMP HOLDER PAIR / CHROME / CHROME

Battery Box Floor For 356A

Battery Box Floor For 356A T2

Battery Box Partition Repair Set, 3 Pieces For 356A REAR

Battery Box Partition Repair Set, 3 Pieces For 356A REAR

Battery Box Rear Partition Repair Set, 3 Pieces For 356B T5 REAR

Battery Box Side Panel, Left, For 356A LEFT

Battery Box Side Panel, Left, For 356A With Long Bumper Bracket for T1 models, needs to get shortened for the T2 model LEFT

Battery Box Side Panel, Right, For 356A RIGHT

Battery Box Side Panel, Right, For 356A With Long Bumper Bracket for T1 models, needs to get shortened for the T2 model RIGHT

Bumper Bracket Mount, Left For 356A T2 LEFT

Bumper Bracket Mount, Right For 356A T2 RIGHT

Front Battery Box Wall For 356A

Front Battery Box Wall For 356A

COMPLETE BATTERY BOX

Battery Box Bowl Repair Panel For 356A Through 356B T5

Front Bumper Guard, Left, 356 Pre-A And 356A T1. 260mm tall. This early version is a little wider at top and bottom.
260 MM / FRONT LEFT

Chrome Plated Bumper Guard Without Exhaust Hole, Left Front Or Right Rear, 356A
EUROPEAN VERSION / CHROME / CHROME / 155 MM / FRONT LEFT

Front Bumper Guard, Left. Fits 356A with overrider tubes. 155mm stud spacing.
USA VERSION / 155 MM / FRONT LEFT

Front Bumper Guard, Right, 356 Pre-A And 356A T1. 260mm tall. This early version is a little wider at top and bottom.
260 MM / FRONT RIGHT

Chrome Plated Bumper Guard Without Exhaust Hole, Right Front Or Left Rear, 356A
EUROPEAN VERSION / CHROME / CHROME / 155 MM / FRONT RIGHT

Polished Bumper Guard, Without Exhaust Hole, Right Front Or Left Rear. 356A. 260mm tall, slightly thinner than earlier versions.
EUROPEAN VERSION / POLISHED / POLISHED / 155 MM / FRONT RIGHT

Front Bumper Guard, Right. Fits 356A with overrider tubes. 155mm stud spacing.
USA VERSION / 155 MM / FRONT RIGHT

Polished Bumper Guard, Left Front or Right Rear, 356A 260mm tall, slightly thinner than earlier versions.
POLIE / EUROPEAN VERSION / POLISHED / POLISHED / 155 MM / FRONT LEFT

Front Fender Brace, Left, For 356, 356A
FRONT LEFT

Front Fender Brace, Left, For 356, 356A
FRONT LEFT

Front Fender Brace, Right, For 356, 356A
FRONT RIGHT

Front Fender Brace, Right, For 356, 356A
FRONT RIGHT

Front Fender Repair Panel Left All 356
LEFT

Front Fender Repair Panel Left All 356
LEFT

Front Fender Repair Panel Right. All 356
RIGHT

Front Fender Repair Panel Right. All 356
RIGHT

Lower Half Front Closing Panel, Left For All 356
FRONT LEFT

Lower Half Front Closing Panel, Right For All 356
FRONT RIGHT

LOWER METAL PLATE IN FRONT OF THE REAR SEATS
LEFT

LOWER METAL PLATE IN FRONT OF THE REAR SEATS
RIGHT

SEAT HOLDER ON FRONT FLOOR 356 A + 5-SPEED BOX - PAIR (TWO BLOCKS)
PAIR / FRONT

SEAT HOLDER ON REAR FLOOR 356 A+5-SPEED BOX (TWO BLOCKS)
PAIR / REAR

Frame Repair Panel, Outer Left For 356A, 356B, And 356C
EXTERIOR REAR LEFT

Frame Repair Panel, Outer Right For 356A, 356B, And 356C
EXTERIOR REAR RIGHT

INNER LONGITUDINAL MEMBER RIGHT REAR – 356A 1955–1959 COUPE / CABRIOLET / SPEEDSTER
REAR RIGHT

INNER RAIL
REAR LEFT

REPAIR PLATE FOR STRINGER, INSIDE PART
LEFT OR RIGHT

Left Front Or Right Rear Longitudinal Reinforcement Plate For 356 Pre-A, 356A, And 356B T5
FRONT LEFT OR REAR RIGHT

Left Front Or Right Rear Longitudinal Reinforcement Plate For 356 Pre-A, 356A, And 356B T5
FRONT LEFT OR REAR RIGHT

Left Rear Or Right Front Longitudinal Reinforcement Plate For 356 Pre-A, 356A, And 356B T5
FRONT RIGHT OR REAR LEFT

Left Rear Or Right Front Longitudinal Reinforcement Plate For 356 Pre-A, 356A, And 356B T5
FRONT RIGHT OR REAR LEFT

REINFORCEMENT IN SAIL
FRONT RIGHT OR REAR LEFT

Short Threshold Sill Joint Panel, Left 356 356A 356B 356C
LEFT

Short Threshold Sill Joint Panel, Right 356 356A 356B 356C
RIGHT

END PLATE FOR REAR STRINGER WITH RAIL FOR ENGINE COVER
REAR LEFT

END PLATE FOR REAR STRINGER WITH RAIL FOR ENGINE COVER
REAR RIGHT

INTERIOR WHEEL ARCH
FRONT LEFT

INTERNAL WHEEL ARCH
FRONT RIGHT

FRAME CROSS BRACKET
RIGHT

FRAME CROSS BRACKET
LEFT

TORSION BAR HOLDER FOR FRONT SUSPENSION
FRONT LEFT

TORSION BAR HOLDER FOR FRONT SUSPENSION
FRONT RIGHT

FOG LAMP HOLDER
PAIR / CHROME / CHROME

Battery Box Partition Repair Set, 3 Pieces For 356A
REAR

Battery Box Partition Repair Set, 3 Pieces For 356A
REAR

Battery Box Rear Partition Repair Set, 3 Pieces For 356B T5
REAR

Battery Box Side Panel, Left, For 356A
LEFT

Battery Box Side Panel, Left, For 356A With Long Bumper Bracket for T1 models, needs to get shortened for the T2 model
LEFT

Battery Box Side Panel, Right, For 356A
RIGHT

Battery Box Side Panel, Right, For 356A With Long Bumper Bracket for T1 models, needs to get shortened for the T2 model
RIGHT

Bumper Bracket Mount, Left For 356A T2
LEFT

Bumper Bracket Mount, Right For 356A T2
RIGHT

INTERIOR PANELLING FRONT LUGGAGE COMPARTMENT
FRONT LEFT

HINGE OPENING ON FRONT BOOT COVER
PAIR

SIDE DRIP CHANNEL FOR FRONT BOOT
LEFT

SIDE DRIP CHANNEL FOR FRONT BOOT
RIGHT

SEAT
REAR RIGHT

SEAT BASE
REAR LEFT

BLANK KEY
BOSCH ASSEMBLY

Oversized Steel Window Regulator Repair Pin, 23mm Long Pivot, Slot Perpendicular To Other End.
23 MM

Oversized Steel Window Regulator Repair Pin. 26mm Long Pivot
26 MM

Steel Window Regulator Repair Pin. 23mm
23 MM

Window Regulator Repair Rivet, 10mm Long.
10 MM

Window Regulator Repair Rivet, 12mm Long.
12 MM

Inner Door Bottom, Left, For 356 Pre-A, 356A, And 356B
LEFT

Inner Door Bottom, Right, For 356 Pre-A, 356A, And 356B
RIGHT

Lower Outer Door Skin, Left, For All 356
LEFT

Lower Outer Door Skin, Right, For All 356
RIGHT

DOOR SURROUND SEAL GUIDE
FRONT RIGHT

DOOR TOWER GASKET GUIDE
FRONT LEFT

Quarter Panel Repair Panel, Left, For All 356
REAR LEFT

Quarter Panel Repair Panel, Left, For All 356
REAR LEFT

Quarter Panel Repair Panel, Right, For All 356
REAR RIGHT

Quarter Panel Repair Panel, Right, For All 356
REAR RIGHT

Complete Rocker Panel With Inner Sill, Left, For 356A, 356B And 356C
LEFT

Complete Rocker Panel With Inner Sill, Left, For 356A, 356B And 356C
LEFT

Complete Rocker Panel With Inner Sill, Right For 356A, 356B And 356C
RIGHT

Complete Rocker Panel With Inner Sill, Right For 356A, 356B And 356C
RIGHT

ENTRANCE LINING
LEFT

ENTRANCE LINING
RIGHT